Galvanized

Click here to visit our Eastern Cape Branch!!!

pvc

Available in IBR, Corrugated and Widespan Profiles only and is manufactured according to your Specifications, you may order any length from 1.8m’s up to 13m’s.

We offer the following thicknesses:

0.27mm in Corrugated 8.5 and 10.5 Rib
Corrugated, IBR & Widespan in / 0.4mm / 0.5mm / 0.8mm
Approximate lead time on Production is +- 8 days.
Deliveries are available – it is the customers responsibility to offload the truck so please ensure that you wear gloves.

*Standard Building regulations require the usage of 0.5mm Z275 FULL HARD MATERIAL

Corrugated

CORRUGATED 10.5 RIB
CORRUGATED 10.5 RIB

 

IBR

IBR 
 

Wide Span

wp382245cb_06
 

Flashings

Sheeting Direct supplies a full range of flashings to customers’ requirements. The standard range of flashings as summarized below is manufactured in 3 m lengths. Non-standard flashings are available on enquiry in different colours, lengths and dimensions.

Corner Flashing 460g

CornerFlashing

Internal Corner Flashing 460g

InternalCornerFlashing

Gable Flashing 460g

GableFlashing

IBR Ridging 460g

IBRRidging

Roll Top 460g

RollTop

Valley Flashing 460g

ValleyFlashing

Sidewall Flashing 305g

SidewallFlashing

Headwall Flashing 305g

HeadwallFlashing

Counter Flashing 150g

CounterFlashing

Broad Flute Closures

BroadFluteClosures

Narrow Flute Closures

NarrowFluteClosures

Drip Flashing 150g

DripFlashing

Drip Flashing 150g

DripFlashing2

   

 

Bullnoses & Center Cranks

Bullnosing and centre-cranking of a profiled sheet incorporate lateral rib indentations pressed in at a uniform distance of 25 mm. Standard bullnoses are made with narrow flute uppermost and the bend away from the angular inclination. Reverse bullnoses are made with the bend into the narrow flute. Bullnoses and cranks can be at the end of a sheet or at any position along the length. Bullnoses and centre cranks can be manufactured in radii ranging from 350 mm to 800 mm for bullnoses which are bent through 0 – 135°. High tensile material can only be bullnosed and cranked to a minimum radius of 450 mm.

bullnose

bullnose1

bullnose2 bullnose3